This tutorial shows how you can boot Linux over HTTP with boot.kernel.org (BKO). All that users need is Internet connectivity and a small program (gpxe) to boot the machine. This gpxe program provides network booting facility. BKO allows you to boot into the following distributions: Debian, Ubuntu, Damn Small Linux, Knoppix, Fedora. BKO provides gpxe images for USB sticks, CDs, and also for floppies, i.e., you can boot from a USB sticks, a CD, or a floppy.
Just for fun, somedays back I was reading the top command. This command is something that I have been using since long time and have never read the man page so I thought let me do that. And yes, it was worth while to look at that page. I came to know that top supports toprc file and that it can be used to configure the way top looks. So:
Here\’s how top looks without the rc file
And here\’s how it looks with the rc file:
And here is the ~/.toprc file:
RCfile for \”top with windows\” # shameless braggin\’
Id:a, Mode_altscr=0, Mode_irixps=1, Delay_time=5.000, Curwin=0
winflags=32184, sortindx=10, maxtasks=0
summclr=2, msgsclr=1, headclr=7, taskclr=7
winflags=62777, sortindx=0, maxtasks=0
summclr=6, msgsclr=6, headclr=7, taskclr=6
winflags=62777, sortindx=13, maxtasks=0
summclr=5, msgsclr=5, headclr=4, taskclr=5
winflags=62777, sortindx=4, maxtasks=0
summclr=3, msgsclr=3, headclr=2, taskclr=3
This is just an example, but you can do much more with the rc file.
If you are managing a remote site, web server that you do not have direct access to (terminal or ssh) and you have to do it with cpanel, then I know how much pain it is. I had the same issue until recently when I discovered sitecopy.
Description of sitecopy:
sitecopy allows you to easily maintain remote Web sites. The program will upload files to the server which have changed locally, and delete files from the server which have been removed locally, to keep the remote site synchronized with the local site, with a single command. sitecopy will also optionally try to spot files you move locally, and move them remotely. FTP and WebDAV servers are supported.
Now that\’s interesting. So how to use sitecopy. I will give you a step by step guide. If you are running Fedora, the package is in the Fedora repo.
So, Lets first install the package :
sudo yum install sitecopy
Once that is done, we need to create a rc file to direct the sites:
site amit –>> Just a name for sitecopy to recognize this site.
server amit-agarwal.co.in –>> The server
remote / ->> Path on the server to manage
local sitecopy –>> the local path for storage of the files.
username xxxx –>> the username for the site
password xxxx –>> the password for the site
url http://amit-agarwal.co.in –>> URL of the site
protocol ftp –> The protocol to use by sitecopy, webdav also can be used.
Put the above file in the home folder as .sitecopyrc. Then change the permission to 0600. Create a folder called .sitecopy and change the permission to 0700. That much for the configuration. Now create the destination storage folder specified in the local configuration above and change the folder permission to 0700. You are ready to go.
Initialize the site:
Then update the site:
sitecopy -s amit
This is supposed to synchronize the local folder with the remote folder but I found that the command did not create the directories recursively, so did a little hack and ran the below to do a complete copy:
sitecopy -s ; while [ $? == 1 ] do sitecopy -s amit; done;
This will complete the initial set of directories for you and then whenever you want to sync the local directory you can run
sitecopy -s amit
and when you make changes locally you can update the site with
sitecopy -u amit